Samsung BP96-01653A How To Guide Replacement DLP Lamp Guide

Click below to buy this lamp now:

Lowest Prices Anywhere!

Compatible TV Models: HLS4676, HLT4675S, HLT5075S, HLT5075SX/XAC, HLS4676S, HLT4675SX, HLT5075SX, HLT5675SX, HLS4676SX, HLT4675SX/XAA, HLT5075SX/XAA, HLT5675SX/XAA, HLS4676SX/XAA.

Assembly part numbers: BP63-00843A, BP63-00839A, BP63-01342A, 6004.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Philips screwdriver, 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original Samsung BP96-01653A Lamp.

NOTE: We recommend you use latex gloves when handling the new bul. to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

	Samsung BP96-01653A Lamp casing			1.- Turn over the enclosure in a way that the lamp faces down and then you’ll see two screws on the sides.
	2.- Unscrew them using the Philips screwdriver.			3.- Disassemble the enclosure and you’ll see the lamp like so.
	4.- Detach the cable that is on the side of the lamp.			5.- Take out the cable on the top of the lamp by removing the nut (you’ll need a pair or pliers).
	6.- There are two metal clips holding the lamp in two corners, take off the screws and then the metal plates.			7.- Pull out the lamp from the enclosure.
	A.- Get yout our brand new Philips lamp.			B.- Place it in the enclosure.
	C.- Set the two metal plates back like they were before and lock them with the screws.			D.- Place the cable at the top terminal of the lamp and secur it with the nut.
	E.- Attach the cable to the side of the lamp with the screw.			F.- Assemble back the enclosure.
	G.- Secure it with the two screws; make sure that it isn’t loose. .			H.- And there it is, your brand new Philips bulb is installed.

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily… this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

Click below to buy this lamp now:

Lowest Prices Anywhere!

Samsung DLP Lamp BP96-01653A How-To Replacement Guide