Samsung DLP Lamp BP96-00224C How-To Replacement Guide

[Español]

You will be redirected to the new guide in  seconds

For Part Number: Samsung DLP Lamp BP96-00224C, BP9600224C, BP96 00224B (sealed replacement lamp for DLP).

For Enclosure: SAMSUNG BP96-00224C.

Television Type: DLP.

For Bulb: PHILIPS E23 UHP 100W / 120W 1.3

E23 100W 120W 1.3

PHILIPS E23 100W 120W 1.3

Click below to buy this lamp now:
buy now
Lowest Prices Anywhere!

Compatible TV Models: HLM4365, HLM507WX, HLN467W, HLN567W, HLM4365W, HLN4365, HLN467WX, HLN567WX, HLM4365WX, HLN4365W1X, HLN5065, HLN567WX/XAA, HLM437, HLN4365W1X/XAA, HLN5065W1X, HLN617W1X, HLM437W, HLN4365WX, HLN5065W1X/XAA, HLN617W1X/XAA, HLM437WX, HLN4365WX/XAA, HLN507, HLP4674WX/XAA, HLM5065, HLN437W1X, HLN507W1X, HLP5674WX/XAA, HLM5065W, HLN437W1X/XAA, HLN507WX, HLR4677W, HLM5065WX, HLN437WX, HLN567, HLR5677W, HLM507, HLN467

Assembly part numbers: AA63-00588A.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Phililps screwdriver, 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original SAMSUNG BP96-00224C Lamp.

NOTE: We recommend you to use latex gloves when handling the new bulb to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

SAMSUNG BP96-00224C

SAMSUNG

BP96-00224C

Lamp casing

 
LAMP CARRIER & LAMP COVER

1.- Let’s begin by flipping the lamp enclosure over, now remove the two screws on either side.

LAMP CARRIER & LAMP COVER

2.- Remove the enclosures handle by pressing on one side and pulling upwards.

 
PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

3.- Now that the metal casing is free you can take it out and see the lamp inside exposed.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

4.- Use your pair of pliers to uninstall the nut conjoining one of the cable connector with the top terminal of the lamp.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

5.- Continue with the side terminal of the lamp and remove the screw located there to remove the second cable.

PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

6.- On the bottom of the base there are two ring shaped lamp holders, you must remove the screws holding them in place.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

7.- Continue with the rest of the screws on the lower lamp holder.

LAMP CARRIER & PHILIPS E23 UHP 100W/120W 1.0

8.- Remove the old lamp by pulling it out of its original place and make way for the new one.

 
PHILIPS E23 UHP 100W/120W 1.0

A.- Prepare your new Philips E23 UHP 100W / 120W 1.3 lamp.

LAMP CARRIER & PHILIPS E23 UHP 100W/120W 1.0

B.- Remove the old lamp by pulling it out of its original place and make way for the new one.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

C.- Reinsert the screw on the bottom lamp holder with your screwdriver.

PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

D.- Continue with the second lamp holder until it is securely in place.

 
PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

E.- Install back the screw that holds together one of the cable connectors with the side terminal on the bulb.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

F.- Take your pair of pliers and reconnect the nut that unites the second cable connector to the top terminal.

 
LAMP CARRIER & LAMP COVER

G.- Insert the metal cover over the lamp enclosure.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

H.- Place the plastic handle back on the lamp enclosure by pressing on the side.

 
LAMP CARRIER & LAMP COVER

I.- With your screwdriver place back the two screws on both sides of the lamp enclosure.

J.- You are now finished,

Congratulations!

 

 

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

 

Click below to buy this lamp now:
buynow
Lowest Prices Anywhere!

 

FixYourDLP.com Blog | FixYourDLP.com Forum | Guides
FixYourDLP Flickr | FixYourDLP YouTube

Copyright ©2014 FixYourDLP.com. All content on this website is intended for information purposes only. FixYourDLP.com is not responsible, nor liable for any damage caused by the end-user, faulty lamps or parts. Please, always have a service center or a trained service technician advise you before beginning any repairs on your own.