RCA-265919 How To Guide Replacement Proyector Lamp Guide

Click below to buy this lamp now:

Lowest Prices Anywhere!

Compatible TV Models: HD50LPW166YX, HD44LPW166YX1(W1), HD44LPW62, HD44LPW62YX1, HD44LPW62YX12, HD44LPW62YX1(W1), HD50LPW166(W1), HD50LPW166AYX2(W1).

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Torx T10 screwdriver (6 point star tip), 1 Torx T8 screwdriver (6 point star tip), 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original RCA 265919 Lamp.

NOTE: We recommend you to use latex gloves when handling the new bulb, to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

	RCA 265919 Lamp casing			1.- Let’s begin by turning the lamp until its facing the surface.
	2.- On the top terminal you have to remove a screw that’s connected to one of the plastic cables.			3.- Take your Torx T10 screwdriver and uninstall the screw that holds the second cable to the side of the lamp.
	4.- Continue with your Torx T8 to take out the screws holding two lamp vents on each side of the bulb.			5.- There is a total of four screws so take them out one by one.
	6.- Now that the vents are loose you can set them aside.			7.- Pull out the old lamp from the enclosure.
	A.- Prepare your new lamp that will look similar to this one.			B.-Insert it the same way you took out the old one.
	C.-Return the vents, one by one to the original place.			D.- Be Carefull to not damaged your new lamp.
	E.- Secure the vents by reinserting the screws on each one.			F.- Tighten them firmly so the bulb can’t move.
	G.- Reconnect the cable to the side of the lamp and insert the screw.			H.- Reinstall the nut that conjoins the second cable to the top terminal on the bulb.
	I.- Once done it will look something like this.			J.-You have completed replacing your lamp. Congratulations!

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

Click below to buy this lamp now:

Lowest Prices Anywhere!

RCA Lamp RCA-265919 How-To Replacement Guide