RCA Lamp RCA-265866 How-To Replacement Guide

[Español]

For Part Number: RCA DLP Lamp Enclosure 265866, 1644987, 16445417, 784050819, 16436090, 7214 ( Unsealed replacement lamp for DLP, SMALL with vents ).

For Enclosure: RCA 265866 DLP Lamp.

Television Type: DLP.

For Bulb: PHILIPS E22 UHP 100W/120W 1.0

UHP 100W/120W 1.0

E 22 1.0 Philips

Click below to buy this lamp now:
buy now
Lowest Prices Anywhere!

Compatible TV Models: RCA HD44LPW134YX1, RCA HD50LPW164YX2(M1), RCA HD50LPW52YX2(M1), RCA HD61LPW164YX3(M1), RCA HD44LPW164YX1(M1), RCA HD50LPW164YX3, RCA.

Assembly part numbers: 1644987, 1645417, 784050819, 16436090, 7214.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Torx T10 screwdriver (6 point star tip), 1 Torx T8 screwdriver (6 point star tip), 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original RCA 265866 Lamp.

NOTE: We recommend you to use latex gloves when handling the new bulb, to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

Enclosure RCA 265866

RCA 265866

Lamp casing

 
Enclosure RCA 265866, Cable connector, Lamp Vents, Lamp Carrier and PHILIPS E22 UHP 100W/120W 1.0 Lamp

1.- To begin, turn the lamp facedown so it will look like this.

LAMP HOLDER 1644937, LAMP COVER 1645417 & PHILIPS E22 UHP 100W/120W 1.0

2.- Unscrew the nut on the top of the lamp, with help of a pair of pliers.

 
Side of the Lamp PHILIPS E22 UHP 100W/120W 1.0 and Cable Connector

3.- Use a Torx T10 screwdriver, and remove the screw that is holding the cable to the side of the lamp.

Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

4.- Using a Torx T8 screwdriver, uninstall the screws holding the lamp vent.

 
Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

5.- Remove the second screw holding the first lamp vent.

Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

6.- Repeat same steps to the second lamp vent.

 
Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

7.- Now your lamp vents are free and safe to be remove.

Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

8.- Uninstall booth lamp vents.

 
Lamp Carrier and PHILIPS E22 UHP 100W/120W 1.0 Bulb

9.- Remove your old lamp, by pulling it out.

Bulbo PHILIPS E22 UHP 100W/120W 1.0

A.- Take out your new bulb and reinstall it, the same way you took out the old bulb.

 
Lamp Carrier and PHILIPS E22 UHP 100W/120W 1.0 Bulb

B.-Install your new PHILIPS E22 UHP 100W/120W 1.0 lamp to the lamp holder.

Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

C.- Place back the lamp vents to their original position.

 
Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

D.- Place them carefully preventing damage on the lamp.

Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

E.- Secure the lamp vent by putting back the screws with a Torx T8 screwdriver.

 
Lamp Vents and Bottom of Lamp PHILIPS E22 UHP 100W/120W 1.0

F.- Repeat same step to the second lamp vent.

G.- Reconnect the cable to the side of the lamp using the Torx T10 screwdriver.

 

H.- Reinstall the cable to the top of the lamp by tightening the nut with a pair of pliers.

Enclosure RCA 265866, Cable connector, Lamp Vents, Lamp Carrier and PHILIPS E22 UHP 100W/120W 1.0 Lamp

I.- And it will look like this.

 

J.-And you’re finished,

Congratulations!

 

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

 

Click below to buy this lamp now:
buynow
Lowest Prices Anywhere!

 

FixYourDLP.com Blog | FixYourDLP.com Forum | Guides
FixYourDLP Flickr | FixYourDLP YouTube

Copyright ©2014 FixYourDLP.com. All content on this website is intended for information purposes only. FixYourDLP.com is not responsible, nor liable for any damage caused by the end-user, faulty lamps or parts. Please, always have a service center or a trained service technician advise you before beginning any repairs on your own.