Panasonic TY-LA2006 How To Guide Replacement DLP TV Lamp Guide

Click below to buy this lamp now:

Lowest Prices Anywhere!

Compatible TV Models: PT-56DLX76, PT-61DLX76.

Assembly part numbers: LSMP0508, LSMP0509, LSMB0323, 800000317.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM.

These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!). Be a smart consumer and do your research! Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: Long Standard Philips (magnetic tip), A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original Panasonic TY-LA2006 Lamp.

NOTE: The bulb should be handled with a clean lint-free cloth at all times to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

	Panasonic TY-LA2006 Lamp casing			1.-Let's start by turning the lamp enclosure upside down, and removing the four screws on the back cover.
	2.-Now you’ll be able to see the lamp exposed and two cables attaché to it.			3.-Uninstall the side screw with your Philips screwdriver.
	4.-Use your pair of pliers to remove the screw conjoining the cable and the top terminal of the bulb.			5.-Dismount the loose connector from the plastic’s lamp base.
	6.-Next, take out the metal lamp holders.			7.-And we remove the old lamp from the plastic base.
	8.- Inside the plastic lamp base you’ll find a small metal clip, do not remove it.			9.- Prepare your new lamp; it will look something like this.
	A.-Place the new lamp on the plastic base.			B.-Reinstall the metal lamp holders so the lamp can stay in its place.
	C.- Return the connector back to its original position on the base of the lamp.			D.-Take your pair of pliers and secure the nut to connectm the cable to the top terminal.
	E.- Now insert the screw on the side terminal of the bulb to secure the second cable.			F.- After your done, it might look something like this.
	G.-Reinstall the four screws in the back of the plastic cover.			H.-And you’re finished, Congratulations!

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it!

Click below to buy this lamp now:

Lowest Prices Anywhere!

Panasonic DLP Lamp TY-LA2006 How-To Replacement Guide