JVC DLP Lamp TS-CL110U How-To Replacement Guide

Click below to buy this lamp now:

Lowest Prices Anywhere!

Compatible Models: HD52FA97, HD52Z575PA, HD-56FN97, HD61FH96, HD52G456, HD52Z585, HD-56FN98, HD61FH97, HD52G566, HD52Z585PA, HD-56FN99, HD-61FN97, HD52G576, HD55G456, HD56G647, HD-61FN98, HD52G586, HD55G466, HD56G657, HD61G587, HD52G587, HD55GC86, HD56G786, HD61G657, D52G657, HD567BP6, HD56G787, HD61G787, HD52G786, HD56BP6, HD56G886, HD61G887, HD52G787, HD56FB97, HD-56G887, HD61Z456, HD52G886, HD56FC97, HD56GC87, HD61Z575, HD52G887, HD56FH96, HD61FB97, HD-61Z575/AA, HD52Z575, HD56FH97, HD61FC97, HD-61Z575/P, HD-61Z575/PA, HD-70A478, HD70G678, HDP61R1U, HD61Z585, HD70FH96, HD70G886, HDP61R2U, HD61Z786, HD70FH97, HD70G887, HDP70R1U, HD61Z886, HD70FN97, HD70GC78, HDP70R2U.

Assembley: LC21571, LC21570, QLL0160-003, QLL0160-004.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM.

These lamps were NOT engineered with and for your JVC TV…only the original lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!). Be a smart consumer and do your research! Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: Standard Philips or screwdriver Tork # 10, Pair of Pliers, A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original JVC Lamp TS-CL110U.

NOTE: The bulb should be handled with a clean lint-free cloth at all times to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

	1.-JVC DLP Lamp TS-CL110U			2.-First remove the two screws on top of the back of the lamp.
	3.-Turn the lamp up side down and remove the other two screws to release the bulb.			4.-Separate the bulb from the rest of the enclosure by pulling carefully out.
	5.-Now, gently lift it up and it should come right off with no problem.			6.-This is the plastic base of the lamp that is left behind after you lifted the bulb.
	7.-Grab your bran new HS110AR10-51 lamp to start reinstalling it.			A.-Place the new bulb on its plastic base.
	B.-And do the same with the side plastic connector to the base.			C.-Make sure that the connector is align and placed in the correct order.
	D.-Insert the plastic housing over the lamp to cover it.			E.-The two tall metal screws should go through the plastic base of the lamp.
	F.-And finally tighten the four screws and make sure the housing doesn’t move.			G.-And now you’re finished! JVC TS-CL110U/A /AA / J

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it!

Click below to buy this lamp now:

Lowest Prices Anywhere!