Samsung DLP Lamp BP96-01795A How-To Replacement Guide

[Español]

You will be redirected to the new guide in  seconds

For Part Number: Samsung DLP Lamp BP96-01795A, SAMSUNG-BP9601795A.

( Unsealed replacement lamp for DLP, SMALL with vents ).

Lamp Type: DLP.

For Enclosure: SAMSUNG Lamp ( enclosure SAMSUNG BP96-01795A ).

For Bulb: PHILIPS E22 UHP 132W / 120W 1.0

Click below to buy this lamp now:
buy now
Lowest Prices Anywhere!

Compatible TV Models: HLT5076S, HLT5076WX, HLT5676SX/XAA, BIXOLON HLT6176S, BIXOLON HLT5076S, BIXOLON HLT5676S, HLT5676SX/XAC, HLT6176SX, HLT5076SX, HLT5676S, HLT6176, HLT6176SX/XAA, HLT5076SXXAA, HLT5676SX, HLT6176S, HLT6176SX/XAC, HLT5076SX/XAC.

Assembly part numbers: BP63-00942A, BP63-00800A, 776012314, 5899.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Phililps screwdriver, 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original SAMSUNG BP96-01795A Lamp.

NOTE: We recommend you to use latex gloves when handling the new bulb to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

SAMSUNG BP96-01795A

SAMSUNG

BP96-01795A

Lamp casing

 
LAMP CARRIER, LAMP COVER & PHILIPS E22 UHP 132W/120W 1.0

1.- On the sides of the enclosures the are two screws holding the lamp cover.

LAMP CARRIER, LAMP COVER & PHILIPS E22 UHP 132W/120W 1.0

2.- Remove them using a Philips screwdriver.

 
LAMP HOLDER, LAMP COVER & PHILIPS E22 UHP 132W/120W 1.0

3.- Now the lamp cover is free, live it at the side and be careful not to damage the cables that are still attached to the lamp.

LAMP CARRIER, CABLE CONNECTOR & PHILIPS E22 UHP 132W/120W 1.0

4.- Unscrew the nut in the top of the lamp to disconnect the cable.

 
LAMP CARRIER, CABLE CONNECTOR & PHILIPS E22 UHP 132W/120W 1.0

5.- Using a Philips screwdriver disconnect the cable placed at the side of the lamp.

LAMP HOLDER, LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

6.-On the base of the lamp, there are two lamp holders.

 
LAMP HOLDER, LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

7.- Remove them with a Phillips screwdriver.

LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

8.- Remove your old lamp, by pulling it out.

 
PHILIPS E22 UHP 132W/120W 1.0

9.- After removing your old bulb take out your new one, wich will look something like this.

LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

A.-Install your new PHILIPS E22 UHP 132/150W 1.0 Lamp to the lamp holder.

 
LAMP HOLDER, LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

B.- Install again the two metal holders to the bottom of the lamp.

LAMP HOLDER, LAMP CARRIER & PHILIPS E22 UHP 132W/120W 1.0

C.-Reconnect the cable on the side of the lamp with the screw.

 
LAMP CARRIER, CABLE CONNECTOR & PHILIPS E22 UHP 132W/120W 1.0

D.- Reconnect the cable to the top of the lamp by tightening the nut.

LAMP CARRIER, LAMP COVER & PHILIPS E22 UHP 132W/120W 1.0

E.- Put the lamp cover back to its original position.

 
LAMP CARRIER, LAMP COVER & PHILIPS E22 UHP 132W/120W 1.0

F.- Place back the two screws to the sides of the lamp cover.

SAMSUNG BP96-01795A

G.- And you’re finished,

Congratulations.

 

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

 

Click below to buy this lamp now:
buynow
Lowest Prices Anywhere!

 

FixYourDLP.com Blog | FixYourDLP.com Forum | Guides
FixYourDLP Flickr | FixYourDLP YouTube

Copyright ©2014 FixYourDLP.com. All content on this website is intended for information purposes only. FixYourDLP.com is not responsible, nor liable for any damage caused by the end-user, faulty lamps or parts. Please, always have a service center or a trained service technician advise you before beginning any repairs on your own.