Samsung DLP Lamp BP96-00224B How-To Replacement Guide

[Español]

You will be redirected to the new guide in  seconds

For Part Number: Samsung DLP Lamp BP96-00224B, BP9600224B, BP96 00224B (sealed replacement lamp for DLP).

For Enclosure: SAMSUNG BP96-00224B.

Television Type: DLP.

For Bulb: PHILIPS E23 UHP 100W / 120W 1.3

E23 100W 120W 1.3

PHILIPS E23 100W 120W 1.3

Click below to buy this lamp now:
buy now
Lowest Prices Anywhere!

Compatible TV Models: HLM4365WX, HLM617WX, HLN5065WX/XAA, HLN617WX/XA, HLM437WX, HLN4365W1X/XAA, HLN507WX, HLN617WX/XAA, HLM5065WX, HLN4365WX, HLN507WX/XAA, HLP4663W, HLM507WX, HLN4365WX/XAA, HLN567WX/XAA, HLP5063WX/XA, HLM617W, HLN437W1X/XAA, HLN617, HLP5063WXXAA, HLM617WS, HLN5065W1X/XAA, HLN617W1X/XAA, L62A, HLM617WS/XAA, HLN5065WX, HLN617WX.

Assembly part numbers: AA63-00588A.

NORMAL DISCLAIMER:
— Do NOT purchase generic brand lamps such as LTI, APO or third-party manufacturers such as OSRAM. These lamps were NOT engineered with and for your TV…only your Philips lamp has been engineered to work flawlessly and output the best possible color. Above that, it just doesn’t make sense to choose an aftermarket lamp for a $5-$10 difference (and in many cases they are more expensive!!).

Be a smart consumer and shop around, do your research! Discount-Merchant.com promises to be the low price leader in all Projection Lamps they carry…if this is not true, let us know and we’ll fix it!

Tools Required: 1 Phililps screwdriver, 1 Pair of Pliers, & A new lamp.

Time Required: About 15 minutes.

Abstract: This guide is being published to show how easy it is to replace your original SAMSUNG BP96-00224B Lamp.

NOTE: We recommend you to use latex gloves when handling the new bulb to avoid any dirt or oil. Our hands are naturally oily…The oil residue from our hands can cause premature failure of the lamp if the front side of the lamp is not wiped down after the installation. It doesn’t hurt to do a final wipe with a clean, non-abrasive, lint-free cloth before reinstalling your lamp…

 

SAMSUNG BP96-00224B

SAMSUNG

BP96-00224B

Lamp casing

 
LAMP CARRIER & LAMP COVER

1.- Start by turning the enclosure upside down, and remove two screws on both side that secure the metal casing.

LAMP CARRIER & LAMP COVER

2.- Now take the plastic handle and press on one side to release is from the rest of the enclosure.

 
PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

3.- Take the metal casing and pull it out to separate it from the plastic lamp base.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

4.- With your pair of pliers remove the nut that secures one of the cable connectors from the top of the lamp.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

5.- Use your Philips screwdriver to uninstall the screw on the side of the lamp that holds the second cable.

PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

6.- Remove the screws of the top plastic lamp holder on the bottom of the enclosure.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

7.- Continue with the rest of the screws on the lower lamp holder.

LAMP CARRIER & PHILIPS E23 UHP 100W/120W 1.0

8.- Displace the old lamp from the enclosure.

 
PHILIPS E23 UHP 100W/120W 1.0

A.- Prepare your new Philips E23 UHP 100W / 120W 1.3 lamp.

LAMP CARRIER & PHILIPS E23 UHP 100W/120W 1.0

B.- Place the new lamp inside the plastic lamp base with the two plastic lamp holders in place.

 
PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

C.- Proceed to reinstall the screws on the bottom lamp holder.

PHILIPS E23 UHP 100W/120W 1.0 & LAMP HOLDER

D.- And the same goes for the top lamp holder.

 
PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

E.- Take one of the plastic cables and screw it back on to the side of the new lamp.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

F.- Reconnect the cable to the top of the lamp, using a pair of pliers.

 
LAMP CARRIER & LAMP COVER

G.- Place the metal cover over the enclosure until it’s correctly secured.

PHILIPS E23 UHP 100W/120W 1.0 & CABLE CONNECTOR

H.- Reinstall the plastic handle that provides additional security that prevents the metal case from coming out.

 
LAMP CARRIER & LAMP COVER

I.- Install the last two screws tightly on both sides of the enclosure.

J.- And we finished,

Congratulations!

 

 

 

IMPORTANT: After installing the replacement bulb, you should wipe it with a clean cloth to avoid any dirt or oil. Our hands are naturally oily…this could reduce considerably the life span of the new lamp.

Again, Discount-Merchant.com promises to be the low price leader in all Projection TV Lamps they carry…if this is not true, let us know and we’ll fix it

 

Click below to buy this lamp now:
buynow
Lowest Prices Anywhere!

 

FixYourDLP.com Blog | FixYourDLP.com Forum | Guides
FixYourDLP Flickr | FixYourDLP YouTube

Copyright ©2014 FixYourDLP.com. All content on this website is intended for information purposes only. FixYourDLP.com is not responsible, nor liable for any damage caused by the end-user, faulty lamps or parts. Please, always have a service center or a trained service technician advise you before beginning any repairs on your own.